[DEMOS] [TRACK PICTURES] [TESTIMONIALS] [FAQ]

TrakMate Lap Counters

TrakMate is a low cost solution to your lap counting and timing. The infrared sensors are easy to install compared to the dead strip technique. Reliable lap counting even when installed on the fastest section of track. TrakMate is professionally built and includes sensors and 10' cable! All you need to do is drill a small hole to mount sensors and provide an overhead light source.  Trakmate is also available in Dead Strip and Reed switch versions.  You will enjoy its accurate lap timing and best lap feature, great for comparing cars and tires etc. TrakMate has many installations worldwide and has received positive responses from customers.

TrakMate 2 - 8 Lanes

• No need for an expensive computer
• Requires Windows 95 or 98 or older computers running DOS
• Includes reliable infrared sensors and 10' cable
• Dead Strip or Reed Switch version available
• Optional relay to turn track power on/off

• 1/1000 second resolution
• Displays Lap number, best and average lap times
• Set number of laps per race or timed races
• View Lap times for every lap
• Minimum lap time

• Supports Lane Rotation, relay and color
• AutoSave summaries and lap times to a text file 
• Print race summaries.
• Large character mode viewable from 20+ feet  (Requires 386 computer or better)
• Diagnostic mode to test sensors
• On screen count down starts.
• Championship Points Series

• Quick Race  
• Timed Race
• Timed Race with Rotation
• Championship

• Supports up to 20 racers
• Supports relay for auto shut off of track power at end of heat.
• Timed or lap heats
• Restart Heats

• TrakMate is continuously being enhanced and updated. Customers can download the latest version.

 TrakMate comes with 10' cable
Four Lane unit shown  

View TrakMate Screens    
Race Screen
Main Menu Screen 
Installation Settings Screen  
Preference Screen  
Diagnostic Screen 
Set Color Of Lanes Screen

 TrakMate will keep track of number of laps completed, lap times, lap average, best lap and race time. All times displayed to 1/1000 of a second.  You set number of laps per race with the maximum being 500 laps. Cars must be placed just before the sensor at start of race. Race starts on fourth beep. A "beep beep beep beeeeeeeep" will be heard, start on the fourth beep. If racer starts too early, the first lap will not count. Four quick beeps will be heard when there is one lap remaining. A beep beeeeeep will be heard when winner crosses finish line and a long beep will be heard when all other cars complete their lap or if winner crosses start line again. Race Over will flash on screen.  hit ESC to go back to main menu. Hit ESC at any time to abort race and go back to main menu.

See also TrakMates Latest Windows Version  if you prefer

See also Frequently Asked Questions

Need a Power Supply?  Improve performance of your home track with this power supply

Connect two monitors to the PC with a video splitter so everyone can see the lap times